sensor

e used the pygame module to display the compass background

Raspberry Pi Car HUD

Objective The objective of the project is to use the Raspberry Pi to create a touchscreen, and Heads Up Display (HUD) for a car. The HUD will also present other necessary real-time data about the vehicle by way of a graphical user interface on a PiTFT screen. Speed, acceleration, temperature inside the car, and rotations […]

Raspberry Pi Car HUD Read More »

14811 A111 Pulsed Radar Breakout 01

Using the A111 Pulsed Radar Sensor with a Raspberry Pi

Introduction Developmental Products: SparkX creates products quickly to deliver the latest innovations as technology advances. While tested, SparkX products are not finalized and come without formal support. Looking for a project that demands highly accurate, state-of-the-art sensing of distance, velocity, motion, or gestures? Beyond ultrasonic or infrared, the SparkX Acconeer A111 offers 60GHz radar capabilities

Using the A111 Pulsed Radar Sensor with a Raspberry Pi Read More »

e Health Sensor Platform V2.0 for Arduino and Raspberry Pi Biometric Medical Applications

e-Health Sensor Platform V2.0 for Arduino and Raspberry Pi [Biometric / Medical Applications]

IMPORTANT: The new generation of the eHealth Sensor Platform is called MySignals. You can find below a brief description and a comparative between the old eHealth v2 Platform and MySignals. If you want to go to the eHealth Tutorial just click here. Discover MySignals, the new eHealth and medical development platform! Differences between the old

e-Health Sensor Platform V2.0 for Arduino and Raspberry Pi [Biometric / Medical Applications] Read More »

Raspberry Pi Hexabitz interface modules offer an easy way to expand your projects

Raspberry Pi Hexabitz interface modules offer an easy way to expand your projects

Hackster.io user Najib Kassab has published a tutorial walking you through how to setup a small project using a Raspberry Pi 4 and Hexabitz modules HF1R0x and H01R0x, H08R6x and H0BR4x. Helping you easily add a wealth of features to your next project including infrared sensors, three axis compass module, strain gauge, state relay module

Raspberry Pi Hexabitz interface modules offer an easy way to expand your projects Read More »

HEILIND ELECTRONICS ADDS OMRONS D6T THERMAL SENSOR TO SENSOR PORTFOLIO

HEILIND ELECTRONICS ADDS OMRON’S D6T THERMAL SENSOR TO SENSOR PORTFOLIO

Heilind Electronics, a leading global distributor of electronic components and authorized distributor for Omron, has expanded its sensor offering with the Omron D6T MEMS thermal sensor. The sensor is designed for non-contact temperature measurement and human detection. Designed for target areas between minus 40 degrees and plus 200 degrees Celsius, the miniature D6T thermal sensor uses Omron’s

HEILIND ELECTRONICS ADDS OMRON’S D6T THERMAL SENSOR TO SENSOR PORTFOLIO Read More »

15V TO 60V – THREE PHASE BRUSHLESS DC MOTOR PRE DRIVER

15V TO 60V – THREE-PHASE BRUSHLESS DC MOTOR PRE-DRIVER

The project presented here is a three-phase BLDC motor pre-driver. The project consists of 3x half-bridge IR2101 driver IC and 6 channel high current N-MOSFETS. The project can be configured as 3 independent half-bridges H-bridge for a brushed DC motor, or a single high current brushless motor driver. The rotor position can be detected using 3 hall sensors assembled in the motor. Hall-effect

15V TO 60V – THREE-PHASE BRUSHLESS DC MOTOR PRE-DRIVER Read More »

BRING YOUR CREATIONS TO LIFE WITH LUMICUBE — AN ULTIMATE LED CUBE KIT FOR THE RASPBERRY PI

BRING YOUR CREATIONS TO LIFE WITH LUMICUBE — AN ULTIMATE LED CUBE KIT FOR THE RASPBERRY PI

A two-man team has created an ultimate LED cube kit for the Raspberry Pi, one that helps to bring your ideas and creativity to life. We created the LumiCube to bring the joy of tinkering with technology to as wide an audience as possible. Perhaps you remember the fun and excitement of sitting in front of

BRING YOUR CREATIONS TO LIFE WITH LUMICUBE — AN ULTIMATE LED CUBE KIT FOR THE RASPBERRY PI Read More »

Scroll to Top