driver Archives - Page 4 of 6 - Raspberry PI Projects

MLX90374 POSITION SENSOR

Melexis’ MLX90374 monolithic magnetic position processor IC enables the design of non-contacting position sensors in automotive and industrial applications Melexis’ MLX90374, a Triaxis® family position sensor, offers stray field robustness featuring two output drivers, high operating voltage, and temperature operation. The MLX90374 is a monolithic magnetic position processor IC. It consists of a Triaxis Hall magnetic front end, an […]

MLX90374 POSITION SENSOR Read More »

HLK-7688A OPENWRT DEVELOPMENT BOARD COMES WITH AN AUDIO JACK

Another OpenWrt audio board based on the processor with HLK-7688A board featuring Hi-Link HLK-7688A module is launched. HLK-7688A board specifications: Wireless Module – HLK-7688A based on MediaTek MT7688 MIPS24KEc processor @ 580 MHz, and equipped with 32MB RAM, 128MB flash Storage – MicroSD card slot Connectivity 802.11 b/g/n WiFi 4 up to 150 Mbps with u.FL antenna connector

HLK-7688A OPENWRT DEVELOPMENT BOARD COMES WITH AN AUDIO JACK Read More »

AAEON LAUNCHES M.2 AND MINI-PCIE BASED AI ACCELERATORS USING LOW-POWER KNERON NPU

Aaeon’s M.2 and mini-PCIe “AI Edge Computing Modules” are based on Kneron’s energy-efficient, dual Cortex-M4-enabled KL520 AI SoC, which offers 0.3 TOP NPU performance on only half a Watt. by Eric Brown @ linuxgizmos.com Aaeon took an early interest in edge AI acceleration with Arm-based Nvidia Jetson TX2 based computers such as the Boxer-8170AI. More recently, it has

AAEON LAUNCHES M.2 AND MINI-PCIE BASED AI ACCELERATORS USING LOW-POWER KNERON NPU Read More »

RGB-D SLAM With Kinect on Raspberry Pi 4 ROS Melodic

It’s not 2020 if you can’t build robots of doom out of scrap consumer electronics… (c)freenect Github issue Last year I wrote an article about building and installing ROS Melodic on new (at that time) Raspberry Pi with Debian Buster OS. The article has received a lot of attention both here on hackster.io and on other platforms.

RGB-D SLAM With Kinect on Raspberry Pi 4 ROS Melodic Read More »

NLM0011/NLM0010- LED DRIVER IC WITH EFFECTIVE NFC-PWM PROGRAMMING

Infineon Technologies developed the NFC-PWM series (NLM0011 & NLM0010) for fast and cost effective implementation of NFC programming for LED drivers. The NFC programming can replace the labor intensive “plug-in resistor” current setting method with the contact less NFC interface. It improves the operational efficiency and flexibility in value chain by implementing automatic programming in the manufacturing line.

NLM0011/NLM0010- LED DRIVER IC WITH EFFECTIVE NFC-PWM PROGRAMMING Read More »

THE EVOLUTION OF LIGHT: NICHIA AND INFINEON TO BUILD HIGH-DEFINITION MICRO-LED MATRIX SOLUTION FOR ADAPTIVE DRIVING BEAMS

Automotive lighting as an important safety and popular design feature in vehicles has evolved rapidly in the past years. Now, Nichia Corporation and Infineon Technologies AG (FSE: IFX / OTCQX: IFNNY) start a collaboration to add further momentum to this evolution. Together, they are developing a high-definition (HD) light engine with more than 16,000 micro-LEDs for front light applications. Unlike current

THE EVOLUTION OF LIGHT: NICHIA AND INFINEON TO BUILD HIGH-DEFINITION MICRO-LED MATRIX SOLUTION FOR ADAPTIVE DRIVING BEAMS Read More »

Custom Wake Word for Google Assistant on Raspberry Pi

****UPDATE***** I have updated the custom wakeword project and here is the latest version https://www.hackster.io/shiva-siddharth/multiple-custom-wakewords-activation-of-google-assistant-d0c986 this is a much better improved of this project.**** Normally, you cannot voice activate Google Assistant SDK on Pi Zero W. By the method shown, not only can you voice activate Pi Zero W or Pi 3, you can voice activate it

Custom Wake Word for Google Assistant on Raspberry Pi Read More »

Raspberry Pi 4 13MP 4K MIPI camera devkit $99

A new Raspberry Pi 4 13 megapixel 4K MIPI camera development kit created by the team at e-Con Systems is now available priced at $99. e-Con Systems I have included a 15cm FPC cable to connect to the MIPI CSI-2 camera interface on Raspberry Pi 4 SBC as well as offering a V4L2 Linux camera

Raspberry Pi 4 13MP 4K MIPI camera devkit $99 Read More »

How to Install Kuman TFT 3.5″ for Raspberry Pi and RetroPie

This is step-by-step how to install and run your Kuman TFT 3.5″ on the Raspberry Pi 3 b+ to enjoy RetroPie. Understanding that many people have problems configuring their Kuman TFT display on the Raspberry Pi together with RetroPie, I have decided to make this step-by-step of how to install the Kuman TFT 3.5″ display

How to Install Kuman TFT 3.5″ for Raspberry Pi and RetroPie Read More »

Raspberry Pi GPIO Expansion Module

PRODUCT DETAILS This module is designed specifically for the Raspberry Pi B+/A+ IO expansion modules, which can effectively solve the Raspberry send IO port insufficient. Module uses four 74HC595 chips to expand 32 IO ports. As shown above, the top of the module will expand the IO of Raspberry Pi again that can be cascaded

Raspberry Pi GPIO Expansion Module Read More »