Today we present an expansion shield for Raspberry Pi to control the very effective GSM/GPRS SIM900 and SIM908 (with GPS) modules: in this way it is possible to extend the functionality of Raspberry Pi for mobile applications (eg: remote control) and, by employing the SIM908 module, even the GPS functionality. Even if we will describe […]
A GSM/GPRS & GPS Expansion Shield for Raspberry Pi Read More »
Let’s expand RaspberryPi functionalities with a shield that is compatible with the Arduino pinout and with an onboard analog to digital converter with 16-bit resolution. Further expansions that we will present in the future will allow you to add a DAC, a number of additional digital I/Os and the ability to connect also with non
Expansion Shield for RaspberryPi compatible with Arduino Read More »
Introduction What happens when a Pi meets an Arduino? A simple example would be, when building a mobile robot, we use the Raspberry Pi to extend its vision and get a nice tiny monitor. Meanwhile, Arduino handle nicely with the motor driving part and delivers fast responses like obstacle avoidance. Because, without the OS, the
Raspberry Pi Meet Arduino Shield SKU:DFR0311 Read More »
Today we introduce a great LCD expansion shield for Raspberry Pi that allows you to create an interface to control applications without the need to constantly keep a monitor, keyboard and mouse connected. Cool! Isn’t it? The enhanced value of a micro PC as Raspberry Pi with respect to a classic microcontroller is to be
An LCD Expansion Shield for your RaspberryPi Read More »
Here are some first passes at a Raspberry Pi shield design. I don’t quite yet know what I’m doing, but here’s the rough idea I’m aiming at. I’m not sure how sensible it is, so I’d love to get any feedback! It’d be nice to have a device that: – controls a filter switcher motor
ircam raspberry pi shield — first steps Read More »
Contents: Introduction Steps Index Links and Documentation Introduction Ingredients: 1 x Raspberry Pi 1 x RFID 125 kHz shield for Raspberry Pi 1 x RFID Antenna 2 x Read only cards (EM4100) 2 x Programmable cards (Read-Write Cards, T5557) NOTE: If you don’t have a Raspberry Pi you can get one buying a Raspberry Pi
Documentation: RFID 125 kHz shield for Raspberry Pi tutorial Read More »
How Does it Work The main brain for this project is Arduino UNO Board along with Arduino Ethernet Shield to give it a wireless connectivity.Arduino runs a code to control a Relay board according to the input and also serves a web page through which respective output to the relay board can be controlled.Through relay
Open Source Home Automation Project using Arduino UNO + Ethernet Shield Read More »
Adding Arduino shields to the Raspberry Pi can be a very big pain. You end up having a mess of wires running around and setting up the software is a challenge in it’s own right. Here is a simple solution to start using your own Arduino Shields with the Raspberry Pi in under 10 minutes.
How to use and Arduino shield with the Raspberry Pi Read More »
The Bridge Shield is a board for students, hackers & researchers. You can use it along with a Pi or Arduino Uno to create cool DIY projects with ease. This will be an open source board and we are presently designing the second generation. We are currently on Kickstarter and you can support us by
Robot Using Raspberry Pi & Bridge Shield Read More »
Arduino has multiple shields and multiple expansion boards, the shields make prototyping with the Arduino a lot easier. A lot of people design custom shields to match their requirements. But in a raspberry pi has a very few number of shields, and a raspberry pi is a powerful device at a cheaper cost and enables
Raspberry Pi Breadboard Shield Read More »
